Oil drop trace method: Take a piece of clean white filter paper and put a few drops of grease on the filter paper. After the grease leaks, if there is black powder on the surface and a sticky feeling when touched with yo···

Adjustment of bearing axial clearanceThe inner ring of the bearing is positioned by the shaft shoulder, and the outer ring is preloaded by the bearing glands on both sides. The axial clearance of the bearing is adjusted ···

1. Excitation caused by changes in the number of loaded rolling elementsWhen a radial load is applied to a bearing, the number of rolling elements carrying the load will change slightly during operation, causing a deviat···

The spirit of spring is hidden and the beginning of summer is longIn April, full of hope and warmthThe birthday party of Hongyuan Bearing employees arrived as scheduledBirthday stars gather together to celebrate birthday···

Overheating is the biggest culprit of bearing failure, mainly because bearing heating is usually an alarm signal for abnormal machine operation. If not dealt with as soon as possible, it will cause chain reactions such a···