1. When installing the bearing, the bearing seal should be removed, washed and then coated with clean high-quality lubricating oil.2. When installing the bearing, the force should be even and not hammered. If the fit int···

Before installation, clean the parts such as the bearing seat or the shaft that cooperate with the bearing, remove oil and impurities, and confirm that there are no burrs or burrs. Be sure to confirm that the inner diame···

Choosing the right bearing has a crucial impact on the performance and life of mechanical equipment. When selecting a bearing, multiple factors need to be considered, including the load, speed, temperature, operating cyc···

Crossed roller bearings for harmonic reducers can be divided into separate outer rings and inner rings as a whole according to their application occasions. The outer ring and the inner ring are both integral. The rolling···

The most common arrangement of bearings is to install a set of axially positioned "same fixed bearings" at one end of the shaft, and a set of axially movable "swimming bearings" at the other end to pr···