There is a contact angle between the ferrule and the ball. The standard contact angle is 15°, 30° and 40°. The larger the contact angle is, the greater the axial load capacity is. The smaller the contact angle is, the···

Counting from left to right the first or the first and second digits together"6" means deep groove ball bearing (0 category)"4" means double row deep groove ball bearings (category 0)"2" or ···

Chamfering is a term in mechanical engineering. In order to remove the burr on the part due to machining and to facilitate the assembly of the part, chamfering is generally made at the end of the part. Chamfers can be se···

In order to prevent bearings from rusting during transportation and storage, precision bearings are usually packed with a thin layer of anti-rust oil on the bearing surface. In order to prevent poor bearing lubrication d···

1. Disassembly skills of bearing seat ringSome mechanical equipment is prone to damage to the connecting rod bearing. After the bearing is damaged, the outer ring remains in the connecting rod hole, and it is difficult t···