A rotary table bearing is a special type of bearing characterized by high precision, high rigidity, and high load-bearing capacity. It mainly consists of an inner ring, outer ring, cage, and rolling elements. The rotary table bearing has a unique structural design; the angle between the inner and outer rings can be adjusted to adapt to different operational requirements. Furthermore, the rolling elements of the rotary table bearing are made of low-friction materials, possessing high rotational speeds and self-lubricating properties, enabling it to withstand high loads while rotating at high speeds.

The joint between the inner or outer ring of the turntable bearing may be slightly misaligned. Before installing the bearing into the bearing housing, loosen the bolts securing the inner or outer ring, then use a plastic hammer to adjust them before installation to ensure a perfect fit between the bearing and the housing. 02. Do not apply external force to the connecting bolts when installing or removing the turntable bearing to prevent damage. 03. When installing the bearing, pay attention to the dimensional tolerances between the bearing and the mounting components to ensure the side clamping flange can firmly press the inner or outer ring against the side.